EPML-Plate/Tilt - Electropermanent magnet vertical steel plate lifting spreader magnet
All Dimensions are in Metric Scale (mm); Conventions and abbreviations used throughout the Store:
L : Length | W : Width | H : Height | T : Thickness (also Height)
The terms Force or Pull Force are used interchangeably throughout the store and refer to the maximum observable or tested force against a 50mm thick grinded finish mild steel plate. The pull force will depreciate with thinner plates or sheets. The Pull force or Force is expressed in lbs, Kgs or N.
10N (Newtons) = approx. 1 Kg = approx 2.2 lbs Pull Force.
- Handles single steel plates upto 12-14 Mtr long in a vertical orientation, the main purpose of which is to conserve expensive space by stacking plates vertically
- Includes all the features of the EPML PLATE model
- Specially mounted magnets to enable swivel of upto 80 deg from horizontal orientation
- Unique EPM technique using double magnet system to handle single steel plates
- EPM needs electricity only during switching magnet ON and OFF
- Can be controlled by a single operator staying at a safe distance
- No battery back required; over 95% saving of electricity compared to conventional electromagnets
- System is configurable and modular and draws 2 or 3 phase mains AC power from 380 to 440 VAC.
- Select this model if you have a special requirement of vertical stacking and destacking and vertical handling of single steel plates in your yard
